Don’t let your workers, their safety or productivity go slip sliding away! Improve your safe work practices and help reduce on-the-job injuries with anti-slip floor coatings. From locker rooms to loading docks, Rust-Oleum’s line of Concrete Saver anti-slip solutions are designed to keep everyone sure-footed.

Easy to apply, all Concrete Saver Anti-Slip Coatings can be used indoors or out. They dry quickly and have a long service life, so you can spend more time working and less time repairing or maintaining your floors.

Rustoleum Concrete Saver 5500 System Acrylic Dustproofer Floor Sealer

Roll and go concrete dustproofer/sealer.

• Convenient, ready-to-use with no measuring or mixing
• Minimal prep required
• Use direct to concrete or as a clear topcoat for an easier to clean and maintain surface
• Seals out water and mild chemicals – Prevents dusting
• Excellent coverage over new and previously coated surfaces
• Fast drying (recoat in one hour, traffic in 12 hours)
• Easy, brush, spray and roller application
• Ideal for interior and exterior concrete floors, walkways, decks and patios in mild industrial and commercial environments
• Low odor and low VOC (<100 g/l)
• USDA acceptable*

Rustoleum Concrete Saver 5600 System Acrylic Urethane Floor Paint

Spruce up your facility floor with low odor, roll and go floor paint.

• Convenient, ready-to-use with no measuring or mixing
• Protects concrete floors from dusting, water damage, staining and mildew
• Excellent coverage over new and previously coated surfaces
• Accepts next day foot traffic
• Easy, brush, spray and roller application
• Ideal for interior and exterior concrete floors, walkways, decks and patios in mild industrial and commercial environments exposed to heavy and light rubber wheeled traffic
• Low odor and low VOC (<100 g/l)
• USDA acceptable*

Rustoleum Concrete Saver 6200 System Fast-Cure Epoxy Floor Coating

High performance, easy maintenance flooring for mild to moderate environments.

• Convenient, ready-to-mix industrial flooring kit
• Excellent two component chemical and abrasion protection – Long lasting protection against dusting, staining and wear
• Fast curing formulation gets you back in service fast (4 hour recoat, 5 hour light traffic)
• Easy, brush and roller application
• Ideal for interior and exterior concrete floors in industrial and commercial environments like warehouses, showrooms, manufacturing, garages and storage facilities
• Low VOC (<250 g/l)
• USDA acceptable*

Contact IBT for additional information about Rust-Oleum Concrete Saver products.

NOTE: Base and activator required. Combine for 1 gallon activated.
* Can be used in USDA facilities based on FSIS Directive 11,000.4 (Rev. 1), November 24, 1995.