48-445T FRAME
HVAC/REFRIGERATION
- Built for the OEM and the replacement market
- Many designed in features for easy installation
- Patented VoltageChange-Device (VCD) for easy voltage selection
- Dripproof and totally enclosed constructions
- Many shaft lengths and diameters available with combination key/flat
- VFD suitable products in three phase platforms
- Robust performance and construction for reliable operation
|
48-56 FRAME
FRACTIONAL
- Totally enclosed, Drip proof & Explosion Proof enclosures
- Rigid base, C-Face with rigid base and C-Face mountings available
- Stocked in both single and three phase
- Designs starting at 1/12 HP up to 3 HP
- Reduce inventory costs with innovative products like the Four-In-One, featuring a bolt-on removable rigid base, 1/4 through 10 HP
|
48-256T FRAME
AGRICULTURAL
- Designed especially for the farmer or the OEM
- Extra-high starting torque designs: Chore Motor®, Crop Dryer, Auger Drive, Farm Duty, Centrifugal Fan and more
- Patented centrifugal Power Switch for extra starting power
- Manual reset overload thermal protection
- Fully gasketed design for additional protection
|
56-215T FRAME
POWERWASH
- USDA-approved white epoxy paint
- Cast conduit box with stainless steel cover
- Internal corrosion resistant coatings on frame, base, endshields, rotor & stator
- Max Guard® insulation system
- Single phase motors have electronic encapsulated starting switch
- 100% stainless steel three phase designs available,
- 1/2 through 10 HP
|
56-508 FRAME
PUMP
- JM/JP close coupled pump, vertical & horizontal mounts
- Vertical solid shaft P-Base
- UL Listed Fire Pump
- Dripproof, Totally Enclosed, Severe Duty, IEEE-841, & Explosion Proof enclosures
- EPAct & NEMA Premium™ Efficiency designs available
- Jet Pump in single and three phase
|
56-449T FRAME
EXPLOSION PROOF
- Broadest range of XP motors in the industry
- Single phase fractional to Severe Duty 449T frame
- Class I Group D or Class I Groups C & D, Class II Groups F & G
- 1.15 service factor
- UL Listed for use with
- ANY PWM DRIVE on the market
- Available in EPAct & NEMA Premium™ Efficiency
- Severe Duty Features
|
GLOBETROTTER
ODP, TEFC AND J/JP
- ODP and TEFC up to 200HP
- 10:1 VT and 2:1 CT on ODP
- 10:1 VT and 10:1CT on TEFC
- Class F Insulation
- F1 assembly, reversible to F2
- UL Recog
|
143-449T FRAME
XRI® SEVERE DUTY
- Premium efficient XRI® design
- 100% cast iron construction
- Internal and external epoxy coatings
- Brass drain and breather • MAX GUARD® insulation system surpasses NEMA MG1, Part 31
- Meets IEEE45 USCG Marine Duty
- CSA Certified for Division 2 hazardous locations
- IEEE-841 meets IP56 & features special foot flatness, Inpro-Seal® bearing isolators and five year warranty
|
NEMA 449 – IEC560
MEDIUM VOLTAGE
- 100 through 2500 HP
- Blue Chip XRI® Severe Duty features
- 100% Cast iron construction for reduced vibration
- Form-wound stator coils with Vacuum Pressure Impregnation (VPI) system
- Rotating shaft seals
- NEMA Design B torques
- 5000 Frame comes with multiple foothole drillings for easy retrofit
|
63-225M FRAME
IEC GLOBETROTTER®
- Meets IEC 34 electrical standards and IEC 72 dimensions and tolerances
- Designed for 50/60 Hz operation
- IP55 Weatherproof enclosures • Wye Start-Delta Run on 7.5 KW & higher
- Meets EPAct and NRCan efficiencies
- Design N with NEMA Design B torques
- Meets IEEE45 and IEC 60092 requirements for use in onshore & offshore
|
SyMAX® INDUSTRIAL
PERMANENT MAGNET AC MOTOR
- Ultra Efficient™ (IE4 or higher)
- 100% cast iron frame construction
- Constant Torque over variable speed
- IP45 – IP56 rated enclosures
- Class H Max Guard Insulation System
- Three-year warranty
|
56-449T FRAME
INVERTER & VECTOR DUTY
- microMAX™ is a direct replacement for PMDC motors & delivers up to 1000:1 constant torque
- Black MAX® Plus provides 1000:1 constant torque, maximum performance & cost-effective construction
- Blue MAX® 2000 provides 2000:1 constant torque and cast iron construction
- MAX GUARD® insulation system exceeds NEMA
- MG 1-31 requirements & eliminates cable length restrictions
|
