Keep Your Material Moving

Keep Your Material Moving

Martin now offers a complete line of heavy duty conveyor pulleys and components, designed and engineered to give maximum protection against premature failure in harsh applications. They are available in stock sizes and as well as made-to-order for custom applications.

Martin Heavy Duty Drum Pulleys are offered in standard duty, mine duty, quarry duty, machined and engineered drums. The product line is for sand and gravel quarries, coal mines, unit packaging, food processing and recycling. These pulleys are manufactured to the same quality standards customers have come to expect from Martin.

Wing pulleys are available in standard duty, mine duty, quarry duty and quarry duty AR, and are designed to meet the most common types of failure: wing folding, premature contact bar wear and hub weld fatigue. Other solutions include lagging in vulcanized, cold bond, strip, shell, weld-on, SOF, molded urethane, Holz and ceramic, and wear parts such as lagged contact bars and wear rims.

Martin products excel in harsh rugged conditions and this superior quality is matched by fast reliable service when needed most.

Drum Pulleys

Machined Drum Pulleys

3 1/2″ to 10 3/4″ diameter

  • Manufactured from heavy wall pipe or tubing
  • Crowned face or flat face
  • Several hub/bushing systems available
  • Machined OD’s for better belt tracking and less vibration

Standard Duty Drum Pulleys

12″ to 60″ diameter; 3/8″ minimum end disc; 1/4″ minimum center plates

  • Several Hub/Bushing systems available

Mine Duty Drum Pulleys

12″ to 60″ diameter; 3/8″, 1/2″, 5/8″ rims; 1″, 1 1/4″ and heavier end discs; 3/8″ center plates

  • Several hub/bushing systems available
  • Double sub-arc weldments

Quarry Duty Drum Pulleys

12″ to 60″ diameter; 1/2″, 5/8″ and 3/4″ rims; 1 1/4″, 1 1/2″, and heavier end discs; 1/2″ center plates

  • Full depth key bushings
  • Several hub/bushing systems available
  • Double sub-arc weldments

V-Guide Drum Pulleys

4″ to 10″ diameter

  • Several hub/bushing systems available
  • Crowned face or flat face available in A, B, or C groove construction
  • Machined OD’s for better belt tracking and less vibration
  • Manufactured from heavy wall pipe or tubing

Wing Pulleys

Standard Duty Wing Pulleys

Available in 6″ thru 60″ diameter; Minimum 3/8″ x 1 1/4″ contact bars; Minimum 1/4″ thick wings; Minimum 10 ga. Gussets

  • Features unique CCI “end pipe” design
  • Better protection against wing folding
  • Better protection against hub-weld fatigue

Mine Duty Wing Pulleys

Available in 8″ thru 60″ diameter; Minimum 5/8″ x 1 1/2″ contact bars; Minimum 3/8″ thick wings; Minimum 1/4″ gussets

  • Features unique CCI “end pipe” design
  • Better protection against wing folding
  • Better protection against hub-weld fatigue

Quarry Duty Wing Pulleys

Available in 10″ thru 60″ diameter; Minimum 3/4″ x 2″ contact bars; Minimum 3/8″ thick wings; Minimum 1/4″ gussets

  • Features unique CCI “end pipe” design
  • Better protection against wing folding
  • Better protection against hub-weld fatigue
  • Features full depth keyed bushings and hubs for higher clamping to shaft

Quarry Duty “AR” Wing Pulleys

Available in 10″ thru 60″ diameter; Minimum 3/4″ x 2″ contact bars “AR 400″ abrasive resistant steel; Minimum 1/2″ thick wings; Minimum 5/16” gussets

  • Features unique CCI “end pipe” design
  • Better protection against wing folding
  • Better protection against hub-weld fatigue
  • Features full depth keyed bushings and hubs for higher clamping to shaft

Other Pulleys

Spiral Pulleys

  • Both drum and wing construction
  • Reverse helixes wrapped around outer diameter
  • Pulley flat bar is under the spiral wrap for added protection
  • Larger welds provide a better bond between the wrap and pulley
  • Designed to remove material from belt
  • Available in standard, heavy, mine and quarry duty

“DSP” – Dead Shaft Pulleys

3/4″ thick fabricated steel mounting pedestals

  • Aggressive construction
  • Piloted flange cartridge – easily interchangeable with other brands
  • Standard “off-the-shelf” integral bearing
  • Increased diameter shafting behind bearings to reduce deflection
  • Available in standard duty, mine duty, quarry duty and quarry duty “AR” construction – wing or drum style

Martin also has special order capabilities. If what you need cannot be found in a catalog, Martin offers alternatives to fit your application.

Whether it’s stock or MTO, IBT and Martin Sprocket can offer you a high quality drum pulley or wing pulley or other heavy duty conveyor components on a cost effective basis. For more information, ask your IBT sales rep or write to IBT.

Share:

Get in touch for help and information

Our head office address:

9400 W 55th St, Merriam, KS 66203

Call for help:

(913) 428-2858

Send us an email

leads@ibtinc.com